Signs You May Have a Hidden Leak
Water bill increased noticeably with no change in usage
Damp or discolored spot on a wall, ceiling, or floor
Sound of running water when all fixtures are off
Unexplained low water pressure
Mold or musty odor with no visible water source
Water-Meter Test
Make sure no water is being used anywhere in the home.
Locate your water meter and note the reading.
Wait 1–2 hours without using any water.
Check the meter again — movement indicates a leak somewhere in your system.
This test confirms a leak exists but doesn’t tell you where it is — that requires the diagnostic methods below.
Visible vs. Concealed Supply vs. Drain Leak
| Type | Where It Shows Up | How It’s Typically Found |
|---|---|---|
| Visible leak | Under a sink, at an exposed pipe | Direct observation |
| Concealed supply leak | Behind walls, under slabs, in the yard | Acoustic, thermal, or pressure testing |
| Drain leak | Slow leak from a drain line, often only wet when in use | Dye test, visual inspection during use |
Acoustic Detection
Acoustic equipment listens for the distinct sound of pressurized water escaping a pipe, helping narrow down a leak’s location without unnecessary digging. It works best on pressurized supply lines and is a common first step for underground or slab leaks.
Thermal Imaging & Pressure Testing
Thermal cameras can reveal temperature differences caused by water inside walls or floors, and moisture meters map dampness. Pressure isolation testing helps confirm which zone a leak originates from when other methods aren’t conclusive.
What Leak Detection Can & Cannot Prove
| Finding | What It Tells You | What It Does Not |
|---|---|---|
| Meter moves, fixtures off | Water is leaving the system somewhere | Exact leak location |
| Moisture/thermal anomaly | Narrows a damp or affected area | Whether the pipe is the source |
| Acoustic signal | Narrows the likely location | Exact repair scope until access |
| Pressure loss in a zone | Confirms leakage in that section | The precise failed fitting/point |
If leak-detection work traces the problem to the city side of the connection (before the meter, or in a city main), that’s generally the City of Rome Water & Sewer Division’s responsibility — contact them at 706-236-4440 to confirm. Some utilities also offer a leak adjustment on your bill after a confirmed and repaired leak.
Documentation to Keep
- Photos of any visible damage
- Your meter-test readings and dates
- Copies of water bills showing the increase
- The provider’s diagnostic report once available
When to Shut Water Off
- Active, worsening water intrusion
- Sudden pressure drop suggesting a burst
- Standing water accumulating faster than contained
For a slow, contained leak, you can often wait for a scheduled visit — see Emergency Plumber if it changes and becomes urgent.
Local Utility & Housing Factors in Rome
Rome’s municipal water system is treated at the Bruce Hamler Water Treatment Facility, and the city/county GIS system includes water and sewer main layers that can help clarify where your service line runs relative to your property. Older Rome homes, including those in the city’s historic districts, are more likely to have aging supply lines — worth checking if your bill rises unexpectedly, though this should be confirmed with an actual meter test rather than assumed from age alone.
Related Pages
Nearby areas: Lindale, GA · Cave Spring, GA · Calhoun, GA
Frequently Asked Questions
How can I tell if a leak is inside my home or on the city’s side?
A meter test confirms a leak exists; a provider can help determine which side of the meter it’s on based on where and how it presents.
Will finding a slab leak require breaking up my floor?
Not always — acoustic and thermal methods are used first to narrow the location and minimize demolition, though some slab leaks do require limited access to repair.
How much water loss from a leak is “normal”?
None, really — any confirmed meter movement with all fixtures off indicates a leak somewhere. Size and urgency vary, but there’s no acceptable ongoing leak.
Does the City of Rome offer bill credit for a confirmed leak?
Some utilities have a leak adjustment policy — contact Rome Water & Sewer Division (706-236-4440) directly to ask about their current process.
Get Connected With a Leak Detection Provider
Call now and describe what you’re noticing.
Call Now: (762) 326-5400